The multifunctional integratedmeasuring accessories are used for analyzing films on boards, blocks, and substrates, and can perform tests such as crystal phase detection, orientation, texture, stress, and in-plane structure of thin films. Multifunctional integrated measuring accessories are typically designed to enhance the functionality of X-ray diffractometer , enabling them to adapt to more diverse testing needs. There is a close relationship between multifunctional integrated measurement accessories and X-ray diffractometer. These accessories not only enhance the functionality and performance of X-ray diffractometer, but also improve its ease of operation and safety. In practical applications, users can choose suitable accessories according to their specific needs to expand the application scenarios of X-ray diffractometer and improve measurement efficiency.

Originally Battery Accessory, testing range: 0.5-160 degrees, temperature resistance: 400 ℃, beryllium window (polyester film) size: diameter 15mm (customizable); Thickness 0.1mm (customizable). They are widely used as X-ray diffractometer accessories in electrochemical systems containing carbon, oxygen, nitrogen sulfur, metal embedded complexes, etc. Originally Battery Accessory is used to fix the entire Originally Battery ​ sample stage on the angle measuring instrument of the X-ray diffractometer, serving as a connection and support.

The small angle diffractometer accessories are special device used in X-ray diffraction (XRD) experiments, mainly for measuring diffraction peaks in the low angle range to study the microstructure and properties of materials. The small angle diffractometer accessories are specialized device for X-ray diffractometers that allows for precise diffraction measurements within a lower 2θangle range (typically from 0°to 5°or lower). This technology is of great significance for studying nanostructures, mesoporous materials, multilayer films, and other materials. By configuring corresponding small angle diffractometer accessories, the thickness of nano multilayer films can be accurately measured. Overall, small angle diffractometer accessories are an indispensable and important component of X-ray diffractometers, with broad application prospects in materials science, chemistry, physics, and other fields.

The TD-5000 X-ray single crystal diffractometer is mainly used to determine the three-dimensional spatial structure and electron cloud density of crystalline substances such as inorganic, organic, and metal complexes, and to analyze the structure of special materials such as twinning, non commensurate crystals, quasicrystals, etc. Determine the accurate three-dimensional space (including bond length, bond angle, configuration, conformation, and even bonding electron density) of new compound (crystalline) molecules and the actual arrangement of molecules in the lattice; Single crystal X-ray diffractometer can provide information on crystal cell parameters, space group, crystal molecular structure, intermolecular hydrogen bonding and weak interactions, as well as structural information such as molecular configuration and conformation. Single crystal XRD is widely used in analytical research in chemical crystallography, molecular biology, pharmacology, mineralogy, and materials science. The single crystal diffractometer adopts the four circle concentricity technique to ensure that the center of the angle measuring instrument remains unchanged regardless of the rotation, achieving the goal of obtaining the most accurate data and obtaining higher integrity. Four circle concentricity is a necessary condition for conventional single crystal scanning. The company's technical personnel have completed the installation and debugging of the foreign single crystal X-ray diffractometer, and the test results have greatly satisfied foreign users. At the same time, the functionality, stability, and after-sales service of the instrument have received unanimous praise from foreign users.

The TDM-20 desktop X-ray diffractometer is mainly used for phase analysis of powders, solids, and similar paste like materials.Benchtop XRD utilizes the principle of X-ray diffractometer to perform qualitative or quantitative analysis, crystal structure analysis, and other polycrystalline materials such as powder samples and metal samples. The TDM-20 desktop X-ray diffractometer is widely used in industries such as industry, agriculture, national defense, pharmaceuticals, minerals, food safety, petroleum, education, and scientific research. The loading of a new high-performance array detector has led to a significant improvement in the performance of benchtop XRD。 Benchtop XRD equipment has a small volume and light weight; The working power of the Benchtop XRD high-voltage power supply can reach 1600 watts; Benchtop XRD can quickly calibrate and test samples; Benchtop XRD circuit control is simple and easy to debug and install; The repeatability of the Benchtop XRD angle can reach 0.0001.

The TD-3700 high-resolution X-ray diffractometer, with all the advantages of the TD-3500 X-ray diffractometer, is equipped with a high-performance array detector. Compared to scintillation detectors or proportional detectors, diffraction calculation intensity can be increased by several tens of times, and complete high-sensitivity, high-resolution diffraction patterns and higher counting intensity can be obtained in a shorter sampling period. The TD-3700 high-resolution X-ray diffractometer supports both conventional diffraction data scanning and transmission data scanning methods. The resolution of transmission mode is much higher than that of diffraction mode, which is suitable for structural analysis and other fields. Diffraction mode has strong diffraction signals and is more suitable for routine phase identification in the laboratory. In addition, in the transmission mode, the powder sample can be in trace amounts, which is suitable for data acquisition in cases where the sample size is relatively small and does not meet the requirements of diffraction method for sample preparation.

The TD series diffractometer embodies the essence of Tongda Technology's research and development over the years, evolving with the demands of the times. X-ray diffractometer is mainly used for phase qualitative and quantitative analysis, crystal structure analysis, material structure analysis, crystal orientation analysis, macroscopic or microscopic stress determination, grain size determination, crystallinity determination, etc. of powder, block or film samples. The TD-3500 X-ray diffractometer produced by Dandong Tongda Technology Co., Ltd. adopts imported Siemens PLC control, which makes the TD-3500 X-ray diffractometer have the characteristics of high accuracy, high precision, good stability, long service life, easy upgrade, easy operation and intelligence, and can flexibly adapt to testing analysis and research in various industries! Angle measuring instrument with hollow shaft structure

A high-precision X-ray single crystal diffractometer designed specifically for materials science research, crystal structure analysis, and industrial quality control. It utilizes the diffraction effect generated by the interaction between X-rays and single crystals to provide users with detailed crystal structure information by accurately measuring diffraction angles and intensities, thereby revealing the microstructure and properties of materials.

The in-situ battery accessory is a component of the X-ray diffractometer accessories.In situ battery accessories are widely used in electrochemical systems containing composite materials such as carbon, oxygen, nitrogen sulfur, and metal inserts. Test range: 0.5-160 degrees Celsius Temperature resistance: 400 ℃ Beryllium window (polyester film) size: diameter 15mm (customizable); Thickness 0.1mm (customizable) Dandong Tongda Technology Co., Ltd. is a professional manufacturer of X-ray diffractometers、Wholesaler of X-ray directional analyzer、Wholesaler of X-series X-ray crystal analyzer。

Today, diffractometer has become an important tool in scientific research, education, medical and other fields. However, the precision and complexity of the diffractometer makes it necessary to take extra care during transportation and packaging.

Dandong Tongda Technology Co., Ltd. is a professional manufacturer of X-ray products, with two main series of products: X-ray analysis instruments and X-ray non-destructive testing instruments. And in 2013, it became the undertaking unit of the X-ray single crystal diffractometer project of the National Major Scientific Instrument and Equipment Development Special Project of the Ministry of Science and Technology. Our company adheres to the principles of customer first, product first, and service first, insists on people-oriented, and has a strong technology team. We are committed to providing users with the highest quality high-tech products with advanced technology, and providing strong support and services to users with efficient technical consulting and after-sales service institutions.

Dandong Tongda Technology Co., Ltd. is a professional manufacturer of X-ray products, with two main series of products: X-ray analysis instruments and X-ray non-destructive testing instruments. And in 2013, it became the undertaking unit of the national major scientific instrument and equipment development special X-ray single crystal diffractometer project of the Ministry of Science and Technology of China. Our company adheres to the principles of customer first, product first, and service first, insists on people-oriented, and has a strong scientific and technological team. We are committed to providing users with the highest quality high-tech products with advanced technology, and providing strong support and services with efficient technical consulting and after-sales service institutions.